BioLogic Ultraviolet water purifier with pure water pack, provides under sink water purification, sediment and carbon filter with ultraviolet disinfection

What is ultraviolet? What is germicidal ultraviolet? What are the beneficial uses of germicidal ultraviolet?
What microorganisms are deactivated by ultraviolet? What are questions to ask when buying ultraviolet?

	Advantages and Special Features of the Bio-logic Pure Water Pack System
	Principle of Operation Specs for Standard Models Maintenance

Principle of Operation of the Bio-logic Pure Water Pack System
The Pure Water Pack filter system removes sediment, rust and particulates, while reducing tastes, odors, organic chemicals and turbidity. The Bio-logic is the ultraviolet disinfection element of the Pure Water Pack. The Bio-logic has been carefully conceived to provide adequate germicidal dosage throughout the disinfection chamber.
1. Filtered water enters the purifier and flows into the annular space between the quartz sleeve and the chamber wall.
2. Suspended microorganisms are exposed to the ultraviolet ray emitted by the germicidal lamp
3. The LED indicator light, located on the ballast, provides visual indication of germicidal lamp operation
4. Water Leaving the purifier is ready for use, no further contact time is required.

Specifications of the Bio-logic Pure Water Pack System
Flow Rate:	1.5 gpm
Voltage	120v 60 Hz
Power Consumption:	.40 amps
Unit Dimensions:	(length) 15" x (width) 5-5/8"x (height) 17-1/2"
Shipping Weight:	18 lbs
Rated Water Pressure:	Maximum PSI 125

Maintenance of the Bio-logic Pure Water Pack System - Ordinary maintenance consists of the cleaning of the quartz sleeve in the water purifier when conditions warrant - Lamp replacement is recommended every 10,000 hours of operation (approximately 12 months of continuous service) - Typical filter cartridge replacement is recommended every 12 months