Ultraviolet monitor, safety sensor, lamp status alarm, remote indicator, stainless filters, flow control valves, time delay mechanism,

	Guardian ultraviolet monitor The Guardian ultraviolet monitors - monitor the intensity of germicidal ultraviolet energy, which penetrates the quartz sleeve and water within the disinfection chamber, while indicator lights and intensity meter provide visual indication of the ultraviolet intensity. Available in 120v 50/60Hz and 220-240v 50/60Hz, 12vDC, and 24vDC available. Available for use with: Sanitron - all models and Mighty Pure - all models comparison chart for uv water purifier monitoring options
	Sentry safety sensor The Sentry safety sensors provide constant visual monitoring of the water purifier's ballast and germicidal lamp operation; indicator lights provide visual indication of ballast and germicidal lamp status. Available in 120v 50/60 Hz and 220 - 240v 50/60Hz. Available for use with: Sanitron - models up to 20 GPM, Mighty Pure - all models and Minipure - all models comparison chart for uv water purifier monitoring options
	SterAlert lamp status alarm The SterAlert lamp status alarm monitors visible light emitted through the sight port plug of the water purifier and activates an audible alarm when visible light falls below acceptable levels. Operates on a 9v battery or optional 120v 60Hz Power Adapter available. Available for use with: Sanitron - all models and Mighty Pure - all models comparison chart for uv water purifier monitoring options
	Sentinel remote indicator Sentinel Remote Indicator monitors lamp operation of one, two, or four lamp ultraviolet units and comes standard with 25-foot connector cord. Additional 25-foot extensions are available. The Sentinel Remote Indicator can be configured for use with a wide variety of germicidal ultraviolet fixtures. The Sentinel Remote Indicator mounts on a surface close to your ultraviolet unit. Its wires and sensors are connected to the unit through holes in the unit wall. Wires from the unit's lamps are wound through the Sentinel's Sensors. These sensors detect the flow of current from the lamps, activating the indicators on the face of the Sentinel . When a sensor does not detect a current, its corresponding indicator will not light. For use with with some of the Air Disinfection line of equipment. Configuration available: 120v 60 Hz and 220v 50 Hz
	Élan stainless filters Élan Stainless Filters out performs conventional filters because the outlets are located above the inlets, providing numerous advantages. Available in a diverse range of flows and variety of micron ratings.
	SureFlo flow control valves . A complete line of 3 gpm to 40 gpm, Type 304 Stainless Steel valves are available. SureFlo Flow Control Valve limits water flow to the rated capacity through the ultraviolet water purifier. For example, if your water purifier has a maximum rated flow of 12 gallons per minute, a 12 gpm flow control valve installed in the water line before the purifier will automatically prevent the water flow from exceeding that rate. Use of the Flow Control Valve is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron and Mighty Pure and Minipure Ultraviolet Water Purifiers.
	Time Delay Mechanism Time Delay Mechanism provides a two minute warm-up period during which the ultraviolet lamp achieves full germicidal output before the water is allowed to flow through the ultraviolet water purifier. The Time Delay Mechanism is used in conjunction with, and is electrically connected to, the Solenoid Valve. Use of the Time Delay Mechanism is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". Configurations Available: 120v/50 or 60 Hz and 220v to 240v / 50 or 60 Hz
	Audio Alarm Audio Alarm is activated by the Guardian Ultraviolet Monitor or Sentry Safety Sensor, and alerts the user to any malfunction detected. Use of the Audio Alarm is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron and Mighty-Pure Ultraviolet Water Purifiers that utilize the Guardian Ultraviolet Monitor. Can also be employed by Sanitron, Mighty Pure and Minipure units in conjunction with the Sentry Safety Sensor. Configurations Available: 120v/50 or 60 Hz and 220v to 240v / 50 or 60 Hz
	Flow Control Valve PVC Flow Control Valve limits water flow to the rated capacity through the ultraviolet water purifier. For example, if your water purifier has a maximum rated flow of 12 gallons per minute, a 12 gpm flow control valve installed in the water line before the purifier will automatically prevent the water flow from exceeding that rate. Use of the Flow Control Valve is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron and Mighty-Pure and Minipure Ultraviolet Water Purifiers.
	Solenoid Valves Solenoid Valves are operated in conjunction with the Guardian Ultraviolet Monitor or Sentry Safety Sensor. These valves prevent water flow through the ultraviolet water purifier whenever an abnormal condition is detected and in the event of power failure. Use of the Solenoid Valve is recommended by the U.S. Public Health Service "Criteria for the Acceptability of an Ultraviolet Disinfection Unit". For use with all Sanitron and Mighty Pure Ultraviolet Water Purifiers that utilize the Guardian Ultraviolet Monitor. Can also be employed by Sanitron , Mighty Pure and Minipure units in conjunction with the Sentry Safety Sensors. Configurations Available: 118v / 50 or 60 Hz and 220v / 50 or 60 Hz. Units manufactured in nylon and brass. Models available for pressure or gravity flows.
	Elapsed Time Indicator Elapsed Time Indicators are real-time, non-resettable display of a water purifier's operating hours. This is extremely useful for scheduling and recording maintenance and lamp replacement. For use with all Minipure , Mighty Pure and Sanitron Ultraviolet Water Purifiers. Configurations Available: 120v / 60 Hz and 220v to 240v / 50 Hz.
	Clamp-Type Mounting Kits & Bracket Mounting Kits Clamp-Type Mounting Kits are stainless steel mounting kits that provide a neat, convenient means to wall or surface mount Minipure Ultraviolet Water Purifiers. The kit includes a pre-drilled set of brackets and clamping rings. Bracket-Type Mounting Kits are stainless steel mounting kits that provide a quick and easy method of installing the purifier on a vertical surface for a neat, professional appearance. The kit includes a pre-drilled set of brackets and the hardware necessary to secure the purifier. This mounting arrangement allows free air circulation to optimize cooling of the ballast housing. For use with all Mighty Pure units and for Sanitron units S14-S2400.