Elan Stainless Filters out perform conventional filters because the
outlets are located above the inlets, providing numerous advantages
What is ultraviolet? What is germicidal ultraviolet? What are the beneficial uses of
germicidal ultraviolet? What microorganisms are
deactivated by ultraviolet? What are
questions to ask when buying ultraviolet?
ÉlanStainless
Filters out perform conventional filters because the
outlets are located above the inlets, providing numerous
advantages. Available in a diverse range of flows and variety of
micron ratings.
Note:
Filter Cartridges are purchased separate from filter housing.
Note: Recommended flow rates are for
guidelines only. Typical flow rates are 3 to 6 gallons per minute per
single-length cartridge. Actual rates vary depending on the
application, solids content, viscosity, micro rating, and length
of filter run desired.
Material, housing: 304 stainless
steel
Botton seals: Natural gum rubber
Temp: Up to 140 degree F (60
degree C)
Pressure rating: Up to 150 psi (10
bar)
Holding rods: CPVC
Rim gaskets: EPDM
O-Ring: Buna-N
* Cartridges are arranged in a single cluster so all
cartridges
are removed at once. (Model EL-100)
** Models EL-190 - EL 560FL have cartridges installed
on lifting rods so a single stack of cartridges are removed at one
time for convenience.
Stainless
Filters out perform conventional filters because the
outlets are located above the inlets, providing numerous
advantages. Available in a diverse range of flows and variety of
micron ratings.
